Logo of the Physikalisch-Technische Bundesanstalt

Pressure

Workinggroup 3.33

Eine Übersicht über die bisherigen Veröffentlichungen der Arbeitsgruppe Druck:

W. Sabuga, O. Ott, Y. Durgut, J. Setina, P. Otal, N. Medina and A. Altintas
Guidelines on the calibration of electromechanical and mechanical manometers
2019, EURAMET Calibration Guide No. 17 (Version 4.0)
W. Sabuga
Introduction – EMPIR JRP 14IND06 pres2vac "Industrial standards in the intermediate pressure-to-vacuum range", Proc. of pres2vac workshop held at RISE, Borås, Sweden, May 16th-17th, 2018
2019, PTB-Bericht Th-10: S. 13-24
J. Könemann, S. Ehlers and W. Sabuga
Overview and perspectives on the development of an oil-based interferometric micromanometer at PTB, Proc. of pres2vac workshop held at RISE, Borås, Sweden, May 16th-17th, 2018
2019, PTB-Bericht Th-10: S. 25-30
S. Ehlers, W. Sabuga and J. Könemann
Design of an interferometric liquid column manometer with in situ density measurement, Proc. of pres2vac workshop held at RISE, Borås, Sweden, May 16th-17th, 2018
2019, PTB-Bericht Th-10: S. 31-48
S. Ehlers, J. Könemann and W. Sabuga
Vacuum liquids for use in liquid column manometers, Proc. of pres2vac workshop held at RISE, Borås, Sweden, May 16th-17th, 2018
2019, PTB-Bericht Th-10: S. 49-62
A. Hashad and W. Sabuga
Dimensional measurements and modelling of FPG and FRS at PTB, Proc. of pres2vac workshop held at RISE, Borås, Sweden, May 16th-17th, 2018
2019, PTB-Bericht Th-10: S. 101-116
N. Vasileiadis, S. Naris, D. Valougeorgis, A. Hashad, S. Ehlers and W. Sabuga
Gas flow modelling and calculation of the effective area of force-balanced piston gauges FPG and FRS, Proc. of pres2vac workshop held at RISE, Borås, Sweden, May 16th-17th, 2018
2019, PTB-Bericht Th-10: S. 117-134
W. Sabuga, A. Hashad and S. Ehlers
Experimental study of PTB FPG as secondary pressure standard, Proc. of pres2vac workshop held at RISE, Borås, Sweden, May 16th-17th, 2018
2019, PTB-Bericht Th-10: S. 135-150
W. Sabuga, T. Konczak, S. Ehlers and A. Hashad
Weather-independent low pressure measurements - II, Proc. of pres2vac workshop held at RISE, Borås, Sweden, May 16th-17th, 2018
2019, PTB-Bericht Th-10: S. 177-186
S. Ehlers, T. Konczak and W. Sabuga
Negative gauge pressure calibration by means of a mercury manometer and conventional gauge pressure piston gauges, Proc. of pres2vac workshop held at RISE, Borås, Sweden, May 16th-17th, 2018
2019, PTB-Bericht Th-10: S. 213-228
S. Ehlers, J. Könemann, O. Ott, H. Wolf, J. Setina, A. Furtado and W. Sabuga
Selection and characterization of liquids for a low pressure interferometric liquid column manometer
2019, Measurement 132: S. 191-198
DOI: 10.1016/j.measurement.2018.09.017
A. Hashad, S. Ehlers, O. Jusko and W. Sabuga
Characterization of a force-balanced piston gauge as a primary pressure standard
2019, Measurement 131: S. 723-729
DOI: 10.1016/j.measurement.2018.09.016
S. Naris, N. Vasileiadis, D. Valougeorgis, A. Hashad and W. Sabuga
Computation of the effective area and associated uncertainties of non-rotating piston gauges FPG and FRS
2019, Metrologia 56: S. 1-10
DOI: 10.1088/1681-7575/aaee18
J. Yue and W. Sabuga
Characterization of the new 1 GPa piston-cylinder assembly of PTB
2019, Measurement 134: S. 788-793
DOI: 10.1016/j.measurement.2018.10.097
D. Bentouati, Y. Durgut, P. Otal, M. Plimmer, D. Pražák, W. Sabuga, S. Ehlers and E. Sinir
Calibration methods for negative gauge pressure down to -100 kPa
2018, Measurement Science and Technology 29 (3): S. 035007
DOI: 10.1088/1361-6501/aa92ea
J. Könemann, W. Sabuga, D. Pražák, T. Rabault and C. Wüthrich
Final report on supplementary comparison EURAMET.M.P-S14 of hydraulic gauge pressure standards from 50 MPa to 1000 MPa
2018, Metrologia 55 Technical Supplement
W. Sabuga, D. Herranz, V. Marcos and N. Medina
Patrones industriales en la región intermedia de presión a vacío
2018, Revista Española de Metrología 7 (13): S. 63-69
J. Könemann, D. Pražák, R. Fira, C. Wüthrich, T. Rabault and W. Sabuga
Evaluation of supplementary comparison EURAMET.M.P-S14 in the range 50 MPa to 1 GPa of hydraulic gauge pressure
2018, Acta IMEKO 7 (1): S. 76-79
DOI: 10.21014/acta_imeko.v7i1.495
W. Sabuga, T. Rabault, C. Wüthrich, D. Pražák, M. Chytil, L. Brouwer and A. Ahmed
High pressure metrology for industrial applications
2017, Metrologia 54 (6): S. 108-124
K. Jousten, J. Hendricks, D. Barker, K. Douglas, S. Eckel, P. Egan, J. Fedchak, J. Flügge, C. Gaiser, D. Olson, J. Ricker, T. Rubin, W. Sabuga, J. Scherschligt, R. Schödel, U. Sterr, J. Stone and G. Strouse
Perspectives for a new realization of the pascal by optical methods
2017, Metrologia 54 (6): S. 146-161
W. Sabuga, O. Ott, Y. Durgut, J. Setina, P. Otal, N. Medina and A. Altintas
Guidelines on the calibration of electromechanical and mechanical manometers
2017, EURAMET Calibration Guide No. 17 (Version 3.0)
A. Salama
Development of pressure multipliers for pressure measurement up to 1.6 GPa
2017, PTB-Bericht Th-9: S. 188 p.
P. Otal, F. Boineau, N. Medina, D. Pražák, C. Wüthrich, S. Saxholm, W. Sabuga, I. Kocas and Y. Durgut
EURAMET.M.P-S9 / EURAMET 1170, LOOP2. Comparison in the negative gauge pressure range -950 to 0 hPa
2017, Metrologia 54 (Tech. Suppl.): S. 07017
C. Gaiser, B. Fellmuth, N. Haft, A. Kuhn, B. Thiele-Krivoi, T. Zandt, J. Fischer, O. Jusko and W. Sabuga
Final determination of the Boltzmann constant by dielectric-constant gas thermometry
2017, Metrologia 54: S. 280-289
W. Sabuga
Industrial standards in the intermediate pressure-to-vacuum range – outline of a European joint research project, JVC-16, EVC-14, Portorož, Slovenia
2016, Program and Book of Abstracts : S. 128-129
S. Ehlers
Data presented in calibration certificates of high-pressure transducers, their interpretation and use under real measurement conditions and procedures
2016, PTB-Bericht Th-7 (High-pressure measurement and calibration", Proc. of training course held at PTB, Braunschweig, Germany, September 18, 2014): S. 53-66
J. Könemann, S. Ehlers, T. Konczak, A. Gluschko and W. Sabuga
Evaluation of calibration results of high pressure transducers and uncertainty analysis
2016, PTB-Bericht Th-7 ("High-pressure measurement and calibration", Proc. of training course held at PTB, Braunschweig, Germany, September 18, 2014): S. 67-74
J. Könemann, T. Konczak, A. Gluschko and W. Sabuga
Handling of high pressure transducers
2016, PTB-Bericht Th-7 ("High-pressure measurement and calibration", Proc. of training course held at PTB, Braunschweig, Germany, September 18, 2014): S. 47-52
J. Könemann, T. Konczak, A. Gluschko and W. Sabuga
Calibration of high pressure transducers
2016, PTB-Bericht Th-7 ("High-pressure measurement and calibration", Proc. of training course held at PTB, Braunschweig, Germany, September 18, 2014): S. 39-46
W. Sabuga
Primary high-pressure standards and methods for the realisation of the pressure scale
2016, PTB-Bericht Th-7 ("High-pressure measurement and calibration", Proc. of training course held at PTB, Braunschweig, Germany, September 18, 2014): S. 11-26
J. Yue, Y. Yang and W. Sabuga
Final report on bilateral supplementary comparison APMP.M.P-S5 in hydraulic gauge pressure from 1 MPa to 10 MPa
2016, Metrologia 53 (Tech. Suppl.): S. 07004
C. Wuethrich, S. Alisic, A. Altintas, I. Andel, van, I.-M. Choi, A. Eltawil, P. Farar, P. Hetherington, I. Kocas, A. Lefkopoulos, P. Otal, D. Pražák, W. Sabuga, R. Salustiano, I. Sandu, M. Sardi, S. Saxholm, J. Setina, I. Spohr, D. Steindl, N. Testa, C. Vámossy and L. Grgec Bermanec
EURAMET.M.P-K8, Comparison in gas media (absolute and gauge mode) in the range from 25 kPa to 200 kPa
2016, Metrologia 53 (Tech. Suppl.): S. 07017
J. Könemann, A. Gluschko, T. Konczak and W. Sabuga
High-pressure transducers as transfer pressure standards evaluated by a 1 GPa pressure comparison
2015, PTB-Bericht Th-6 ("High-pressure metrology for industrial applications", Proc. of HighPRES workshop held at PTB, Braunschweig, Germany, September 17, 2014): S. 55-80
W. Sabuga, A. Gluschko and T. Konczak
Development of 1.6 GPa pressure standards
2015, PTB-Bericht Th-6 ("High-pressure metrology for industrial applications", Proc. of HighPRES workshop held at PTB, Braunschweig, Germany, September 17, 2014): S. 9-26
A. Salama and T. Rabault
Elastic constant measurements by strain gauges and RUS methods
2015, PTB-Bericht Th-6 (Proc. of HighPRES workshop held at PTB, Braunschweig, Germany, September 17, 2014): S. 45-54
A. Salama and T. Rabault
FEM analysis of the high-pressure multipliers and components
2015, PTB-Bericht Th-6 ("High-pressure measurement and calibration", Proc. of HighPRES workshop held at PTB, Braunschweig, Germany, September 17, 2014): S. 27-44
T. Zandt, W. Sabuga, C. Gaiser and B. Fellmuth
Measurement of pressures up to 7 MPa applying pressure balances for dielectric-constant gas thermometry
2015, Metrologia 52: S. 305-313
W. Sabuga and T. Priruenrom
An Approach to Synchronise Effective Areas of Pressure Balances
2015, MAPAN 30 (1): S. 7-13
ISSN: 0970-3950
DOI: 10.1007/s12647-014-0116-y

Keywords: Piston-cylinder assembly; Dimensional effective area; Cross-float effective area ratio; Synchronised effective area
I. Kocas, W. Sabuga, A. El-Taweel, C. Korasie, P. Farar, J. Setina, B. Waller and Y. Durgut
Final report on key comparison EURAMET.M.P-K13 in the range 50 MPa to 500 MPa of hydraulic gauge pressure
2015, Metrologia 52 (1A): S. 07008

Abstract: The regional key comparison EURAMET.M.P-K13 for pressure measurements in liquid media from 50 MPa to 500 MPa was piloted by the T
W. Sabuga, D. Pražák and T. Rabault
Recent progress in high pressure metrology in Europe
2014, EPJ European Physical Journal - Web of Conferences 77
Z. Krajíček, M. Bergoglio, K. Jousten, P. Otal, W. Sabuga, S. Saxholm, D. Pražák and M. Vičar
Final report on EURAMET.M.P-K4.2010: Key and supplementary comparison of national pressure standards in the range 1 Pa to 15 kPa of absolute and gauge pressure
2014, Metrologia 51 (1A): S. 07002
http://iopscience.iop.org/0026-1394/51/1A/07002

Abstract: This report describes a EURAMET comparison of five European National Metrology Institutes in low gauge and absolute pressure in gas (nitrogen), denoted as EURAMET.M.P-K4.2010. Its main intention is to state equivalence of the pressure standards, in particular those based on the technology of force-balanced piston gauges such as e.g. FRS by Furness Controls, UK and FPG8601 by DHI-Fluke, USA. It covers the range from 1
W. Sabuga and R. Haines
Development of 1.6 GPa pressure-measuring multipliers
2014, ACTA IMEKO 3 (2)
C. Gaiser, T. Zandt, B. Fellmuth, J. Fischer, O. Jusko and W. Sabuga
Improved determination of the Boltzmann constant by dielectric-constant gas thermometry
2013, Metrologia 50 (6): S. L7

Abstract: Fellmuth et al (2011 Metrologia 48 [http://dx.doi.org/10.1088/0026-1394/48/5/020] 382–90 ) published the first value of the Boltzmann constant k determined by dielectric-constant gas thermometry at the triple point of water ( k
T. Priruenrom, W. Sabuga and T. Konczak
Final report on APMP.M.P-S4: Results of the bilateral supplementary comparison on pressure measurements in the range (60 to 350) kPa of gauge pressure in gas media
2012, Metrologia 50, Tech. Suppl., 07009
DOI: 10.1088/0026-1394/50/1A/07009
D. Pražák and W. Sabuga
High Pressure Metrology for Industrial Applications – Outline of a European Joint Research Project
2012, Program and Book of Abstracts, 50th European High Pressure Research Group Meeting, Thessaloniki, Greece, 16-21 September : S. 134
W. Sabuga, D. A. Olson, J. C. Torres, S. Yadav, Y. Jin, T. Kobata and P. Otal
Final report on key comparison CCM.P-K13 in the range 50 MPa to 500 MPa of hydraulic gauge pressure, Tech. Suppl., 07006
2012, Metrologia 49
W. Sabuga, T. Priruenrom, G. Molinar, G. Buonanno, T. Rabault, P. Wongthep and D. Pražák
FEA calculation of pressure distortion coefficients of gas-operated pressure balances – EURAMET project 1039
2012, Measurement 45: S. 2464-2468
http://www.sciencedirect....cle/pii/S0263224111003824
D. Salama, W. Sabuga and P. Ulbig
Measurement of the elastic constants of pressure balance materials using resonance ultrasound spectroscopy
2012, Measurement 45: S. 2472-2475
http://www.sciencedirect....cle/pii/S0263224111003897
W. Sabuga, D. A. Olson, J. C. Torres, S. Yadav, Y. Jin, T. Kobata and P. Otal
Final Report on Key Comparison CCM.P-K13 in the Range 50 MPa to 500 MPa of Hydraulic Gauge Pressure, Tech. Suppl., 07006
2012, Metrologia 49
H. Ahrendt, J. Könemann, W. Sabuga, Y. Kiselev, O. Vitkovskiy, D. Pražák, Z. Krajíček and K. Dapkeviciene
Final Report on COOMET Key Comparison of National Pressure Standards in the Range 100 Pa to 5 kPa of Gauge Pressure (COOMET.M.P-K14), Tech. Suppl., 07001
2012, Metrologia 49
Page:  
Previous | 1, 2 | Next