Logo of the Physikalisch-Technische Bundesanstalt
symbolic picture: "magazines"

Electrons on a straight path

Novel ionization vacuum gauge as a reference instrument

PTB News 2.2021
Especially interesting for

vacuum technology

process technology

A novel ionization vacuum gauge offers a solution for the stability of commercially available devices that has been insufficient so far and enables predictable sensitivities. This is made possible by leading the electrons on a straight path through the ionization space.

Schematic representation of the novel ionization vacuum gauge with the simulated electron trajectory (red, top) and the simulated ion trajectories (purple and turquoise, bottom). Ions that do not originate in the ionization space (turquoise) are not led to the collector (dark blue).

Vacuum gauges or partial pressure gauges are used for process control in many areas of industry, especially in the semi-conductor industry. Ionization vacuum gauges are used for on-site calibration and for monitoring in the high and ultra-high vacuum ranges. The principle of these devices consists in ionizing gas molecules by means of fast electrons and then measuring the resulting ion current. For traceability, conventional ionization vacuum gauges must be individually calibrated not only for nitrogen, but also for the gas used in each specific case, since sensitivity to a particular type of gas depends on the individual device used.

To simplify the calibration process, a novel ionization vacuum gauge was developed within the scope of the EMPIR project titled “Ion Gauge”. In contrast to conventional vacuum meters with undefined electron trajectories, electrons are, in this case, led on a straight path through the ionization space from the cathode into a Faraday detector. In addition, the ion collector is used as an electrostatic lens to focus the electrons on the exit orifice of the anode. The electrons are led through a deflector onto the Faraday detector in such a way that the X-rays emitted when the electrons hit the detector cannot reach the ion collector, where they would distort the measurement result.

Due to the ionization vacuum gauge’s construction principle, both the length of the electron trajectory and the area from which ions can get to the collector are well defined and do not depend on the type of device used. Thus, sensitivity to a given type of gas can be determined either by means of a known ionization probability or by a merely type-specific – but not instrument-specific – calibration for all vacuum meters of the given type, which saves a considerable amount of effort and money.

In addition, previously obtained experimental results have shown that the new device type has a reproducibility and a transport instability of better than 1 %, which had so far been unprecedented in the case of ionization vacuum gauges. This device can therefore be used both as a reference measuring instrument for calibration laboratories and as a transfer standard for comparisons. For its broad-scale application, it is planned that this novel type of ionization vacuum gauge will be used as a standard by ISO.


Karl Jousten
Department 7.5 Heat and Vacuum
Phone: +49 030 3481-7262
Opens local program for sending emailkarl.jousten(at)ptb.de

Scientific publication

B. Jenninger et al.: Development of a design for an ionisation vacuum gauge suitable as a reference standard. Vacuum 183, 109884 (2021)