Precise thickness measurement of soft materials by means of contact stylus instruments
PTB develops procedures for a better characterization of thin polymer layers in microsystems
10.06.2013
The drawing illustrates the problem which occurs when measuring soft materials: The stylus tip of a contact stylus instrument runs from left to right over a solid substrate on which a layer of a soft polymer has been applied. If the contact force remains the same, the indentation depth of the stylus tip in the substrate dS is clearly smaller than the indentation depth in the polymer dP.
Simplified representation of a probe which delineates the surface of a component. To be able to precisely measure also the height of small components made of polymers, the manufacturers need a new procedure
From the motion sensor to the computer chip - in many products of daily life components are used whose functioning is based on smallest structures of the size of thousandths of millimetres. Here, the measurements must be exact so that in the end, the overall system will work smoothly. To be able to continue to measure also thin layers of elastic polymers on hard substrates dimensionally by means of contact stylus instruments, PTB has developed a procedure for the correction of the measurement results in cooperation with other European metrology institutes. The scientists have mainly investigated the properties of the widely used Photoresist SU-8® as well as the Polymer Ormocomp® used for the manufacturing of microoptics.
In the case of such soft materials, the contact force, the stylus tip radius and the traverse speed have an influence on the deformation of the component and, thus, on the measurement result. Hence, for the modelling of the observed systematic errors of tactile layer thickness measurements, a model with nonlinear strain hardening has been chosen which takes into account elastic, plastic and viscous deformations. In a next step, the viscoelastic-plastic model will be extended so that the ageing of polymers can also be taken into account.
On the one hand, the results of this work shall enter into a standard and, on the other hand, they shall supply industry with a practical auxiliary means to correct their measurement results. The research work takes place within the scope of the international MeProVisc project (dynamic mechanical properties and long-term deformation behaviour of viscous materials) which forms part of the European Metrology Research Programme (EMRP) and will presumably have been completed by the end of 2014.
Contact at PTB
Dr. Uwe Brand,
Working Group 5.11 "Hardness and Tactile Probing Methods",
phone: +49 (0)531-592-5111,
e-mail: uwe.brand(at)ptb.de
For further information:
Information "Dickenmessung weicher Polymerschichten mit Tastschnittgeräten" on the web page of Department 5
Brand, U.; Beckert, E.; Beutler, A.; Dai, G.; Stelzer, C.; Hertwig, A.; Klapetek, P.; Koglin, J.; Thelen, R. and Tutsch, R.: Comparison of optical and tactile layer thickness measurements of polymers and metals on silicon or SiO2. Meas. Sci. Technol. 22 (2011) 094021 (14pp).