Dr. rer. nat. Otto Jusko

Head of Working Group Geometrical Standards AG 5.31

Form- and dimensional calibration, flatness, DKD-Supervisor (Form, dimensional calibration)

E-Mail: otto.jusko@ptb.de

Phone: +49 531 592-5310

Dr.-Ing. Michael Neugebauer

Comparator for form and dimensional calibration, contour measurement, consulting

E-Mail: michael.neugebauer@ptb.de

Phone: +49 531 592-5212

Dipl.-Ing. (FH) Dirk Bastam

E-Mail: dirk.bastam@ptb.de

Phone: +49 531 592-5213

Helge Reimann

E-Mail: helge.reimann@ptb.de

Phone: +49 531 592-5219

Sabrina Koslowski

E-Mail: sabrina.koslowski@ptb.de

Phone: +49 531 592-5218

Kushtrim Demolli

E-Mail: kushtrim.demolli@ptb.de

Phone: +49 531 592-5214

Dr.-Ing. Klaus Wendt

Head of Working Group Coordinate Measuring Machines AG 5.32

Photogrammetry, theodolite systems, lasertrackers, inspection large coordinate measuring machines by multilateration, calibration procedure of 2D artefacts for optical probing

E-Mail: klaus.wendt@ptb.de

Phone: +49 531 592-5323

Dipl.-Ing. Matthias Franke

Software development and support, software test, virtual coordinate measuring machine, Internet based CMM monitoring

E-Mail: matthias.franke@ptb.de

Phone: +49 531 592-5324

Dipl.-Ing.(FH) Norbert Gerwien

Calibration of ball and hole plates, measurements on ZEISS UPMC 1200 Carat, cube calibration

E-Mail: norbert.gerwien@ptb.de

Phone: +49 531 592-5326

Dipl.-Ing. (FH) Min Xu

Development and tests of simulation algorithms

E-Mail: min.5.xu@ptb.de

Phone: +49 531 592-5323

Gundula Konert

E-Mail: gundula.konert@ptb.de

Phone: +49 531 592-5327

Dipl.-Inform. Andreas Wodrich

Internet-based software validation

E-Mail: andreas.wodrich@ptb.de

Tel.: 0531 592-5330

Dr.-Ing. Karin Kniel

Head of Working Group Gear and Thread AG 5.33

Gear and thread measurements on CMM

E-Mail: karin.kniel@ptb.de

Phone: +49 531 592-5388

Dr.-Ing. Folke Santel

Projectmanagement for thread measurements

E-Mail: folke.santel@ptb.de

Phone: +49 531 592-5335

Dipl.-Ing.(FH) Silke Kraul

Gear standard-calibration

E-Mail: silke.kraul@ptb.de

Phone: +49 531 592-5338

Dipl.-Ing.(FH) Achim Wedmann

Thread standard-calibration

E-Mail: achim.wedmann@ptb.de

Phone: +49 531 592-5226

Dipl.-Phys. Kerstin Rost

Development and tests of simulation algorithms

E-Mail: kerstin.rost@ptb.de

Phone: +49 531 592-5323

Dr.-Ing. Ulrich Neuschaefer-Rube

Head of Working Group Multisensor Metrology AG 5.34

Consulting, inspection of optical sensors for coordinate measuring machines, computed tomography, Project MODU

E-Mail: ulrich.neuschaefer-rube@ptb.de

Phone: +49 531 592-5311

Dr. rer. nat. Markus Bartscher

Computed tomography, DKD-assessment, DAP-Begutachtung, Development of reference objects, Traceability of large coordinate measuring machines

E-Mail: markus.bartscher@ptb.de

Phone: +49 531 592-5341

Dipl.-Ing. Matthias Schulze

Computed tomography

E-Mail: matthias.schulze@ptb.de

Phone: +49 531 592-5345

Dipl.-Ing. Marc Koch

Computed tomography

E-Mail: marc.koch@ptb.de

Phone: +49 531 592-5343

Dipl.-Ing.(FH), Master of Science Wiebke Ehrig

Project MODUS

E-Mail: wiebke.ehrig@ptb.de

Phone: +49 531 592-5346

Dipl.-Ing.(FH) Dieter Schulz

Opto-taktile sensor, Internet

E-Mail: dieter.schulz@ptb.de

Phone: +49 531 592-5337

Dipl.-Ing.(FH) Jürgen Hirsch

Head of Working Group Metrology Services Coordinate Metrology AG 5.35

Processing of metrological service, Measurements on Mahr MMC, alpha-calibration(dilatometer), optical coordinate measurement, Calibration of 2D artefacts for optical probing

E-Mail: juergen.hirsch@ptb.de

Phone: +49 531 592-5325

Dipl.-Ing. Erwin Gettkandt

alpha-calibration, measurements on Leitz PMM

E-Mail: erwin.gettkandt@ptb.de

Phone: +49 531 592-5328

Konrad Hierse

Calibration of ball and hole plates, measurements on Leitz PMM

E-Mail: konrad.hierse@ptb.de

Phone: +49 531 592-5328

Karsten Kusch

Laboratory technician

E-Mail: karsten.kusch@ptb.de

Phone: +49 531 592-5325

Harald Siems

Laboratory technician

E-Mail: harald.siems@ptb.de

Phone: +49 531 592-5204